DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen item(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C1110-04 | CONTROLLER FAILURE(Controller failure) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | When there is an internal malfunction in the ABS actuator and electric unit (control unit). | ||
| Diagnosis delay time | 1 second or less | ||
| C1110-08 | CONTROLLER FAILURE(Controller failure) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | When there is an internal malfunction in the ABS actuator and electric unit (control unit). | ||
| Diagnosis delay time | 1 second or less | ||
| C1110-49 | CONTROLLER FAILURE(Controller failure) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | When there is an internal malfunction in the ABS actuator and electric unit (control unit). | ||
| Diagnosis delay time | 1 second or less | ||
| C1110-1C | CONTROLLER FAILURE(Controller failure) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | When there is an internal malfunction in the ABS actuator and electric unit (control unit). | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
NOTE:
Confirm if DTC is PAST or CRNT. If DTC is CRNT, proceed with Diagnosis Procedure. If DTC is PAST, clear the DTC. Do not replace the ABS actuator and electric unit (control unit) for a PAST DTC.
| PAST DTC | CRNT DTC |
|---|---|
|
|
FAIL-SAFE
The following systems are suspended:
- VDC function
- TCS function
- ABS function
- Brake assist function
- Hill start assist function
- Brake force distribution function