LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2024 >> QX55 Essential >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Door And Lock (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Back Door Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. SYMBOL CONSULT
      1. Select "DOOR SW-BK" in "Data Monitor" mode of "BCM(DOOR LOCK)".
      2. Check that the function operates normally according to the following conditions:
      Monitor item Condition Status
      DOOR SW-BK Back door Open On
      Closed Off

    Is the inspection result normal?

    YES>>

    Door switch is OK.

    NO>>

    Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals