DTC Description
DTC DETECTION LOGIC
NOTE:
- If DTC B261B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
- If DTC B261B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| B261B-00 | RES ENG RUN STUCK MALFUNC(BCM) | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | The BCM has requested ignition OFF but ECM keeps the engine running for more than 10 seconds after the OFF request was made | ||
| Diagnosis delay time | - | ||
POSSIBLE CAUSE
- ECM
FAIL-SAFE
-