Component Function Check

1. CONSULT
   1. Select "FUEL METER" in "Data Monitor" mode of "METER/M".
   2. Compare the "FUEL METER" value and the fuel gauge reading of the combination meter. Fuel gauge and data monitor indications should be close.

   Combination meter	Monitor item
   Fuel gauge	FUEL METER [L](Approx.)
   1	59.9
   3/4	48.0
   1/2	32.6
   1/4	18.1
   Empty	2.9

Does the data monitor value approximately match the fuel gauge indication?

YES>>

Inspection End.

NO>>

Replace combination meter. Refer to Removal and Installation .