Additional Service When Replacing Sonar Control Unit: Description
BEFORE REPLACEMENT
When replacing sonar control unit, save or print current vehicle specification with CONSULT configuration before replacement.
NOTE:
If "Before Replace ECU" cannot be used, use the "After Replace ECU" or "Manual Configuration" after replacing sonar control unit.
AFTER REPLACEMENT
CAUTION:
When replacing sonar control unit, you must perform "After Replace ECU" with CONSULT.
- Complete the procedure of "After Replace ECU" in order.
- If you set incorrect "After Replace ECU", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.