Meter Control Switch

The trip reset switch is located on the cluster lid A.

Courtesy of NISSAN NORTH AMERICA, INC.
Transmits the trip reset signal to the combination meter.

No.	Switch name	Operation	Description
1.	Trip reset switch	Press	The trip meter can be switched between A and B. Trip meter A/B can be reset by pressing and holding the trip reset switch. A trip computer value displayed on the information display can be reset by pressing and holding the trip reset switch for 1 second or more. All trip computer values can be reset by pressing and holding the trip reset switch for 3 seconds or more.

The illumination control switch is located on the instrument panel lower LH.

Courtesy of NISSAN NORTH AMERICA, INC.
Transmits the following signals to the combination meter:
- Illumination control switch signal (+)
- Illumination control switch signal (-)

No.	Switch name	Operation	Description
1.	Illumination control switch (+)	Press	An illuminance level of the back light of the combination meter can be adjusted.
	Illumination control switch (-)