Data Monitor

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER

[mph or km/h]

X

Displays the value of vehicle speed signal.

SPEED OUTPUT

[mph or km/h]

X

Vehicle speed signal value transmitted to other units via CAN communication.

ODO OUTPUT

[mph or km/h]

Odometer signal value transmitted to other units via CAN communication.

TACHO METER

[rpm]

X

Value of the engine speed signal received from ECM via CAN communication.

FUEL METER

[L]

X

Fuel level indicated on combination meter.

W TEMP METER

[deg.F] or [deg.C]

X

Displays the value of engine coolant temperature signal, which is input from ECM.

ABS W/L

[ON/OFF]

Displays [ON/OFF] condition of ABS warning indicator.

VDC/TCS IND

[ON/OFF]

Displays [ON/OFF] condition of VDC OFF indicator lamp.

SLIP IND

[ON/OFF]

Displays [ON/OFF] condition of SLIP indicator lamp.

BRAKE W/L

[ON/OFF]

Displays [ON/OFF] condition of brake warning indicator.

DOOR W/L

[ON/OFF]

Displays [ON/OFF] condition of door warning message.

TRUNK/GLAS-H

[ON/OFF]

Displays [ON/OFF] condition of back door open warning message.

HI-BEAM IND

[ON/OFF]

Displays [ON/OFF] condition of high beam indicator.

TURN IND

[On/Off]

Displays [ON/OFF] condition of turn indicator.

FR FOG IND

[On/Off]

Displays [ON/OFF] condition of front fog lamp indicator.

LIGHT IND

[On/Off]

Displays [ON/OFF] condition of light indicator.

OIL W/L

[ON/OFF]

Displays [ON/OFF] condition of low oil pressure warning message.

MIL

[ON/OFF]

Displays [ON/OFF] condition of malfunction indicator.

BA W/L

[ON/OFF]

Displays [ON/OFF] condition of FEB warning lamp judged from FEB warning lamp signal received from ADAS control unit via CAN communication.

4WD W/L

[ON/OFF]

Displays [ON/OFF] condition of tire AWD warning message.

STRG SW INPUT

[SW 1-SW 10, NOT INPUT]

Displays [SW 1-SW 10, NOT INPUT] condition of steering switches.

FUEL W/L

[On/Off]

Displays [ON/OFF] condition of low-fuel warning message.

WASHER W/L

[On/Off]

Displays [ON/OFF] condition of low washer fluid warning message.

AIR PRES W/L

[ON/OFF]

Displays [ON/OFF] condition of tire pressure warning lamp.

KEY G/Y W/L

[On/Off]

Displays [ON/OFF] condition of key green warning lamp.

EPS W/L

[On/Off]

Displays [ON/OFF] condition of EPS warning indicator.

ECO MODE IND

[On/Off]

Displays [ON/OFF] condition of ECO MODE indicator in the information display.

LCD

Displays the value of Intelligent Key system message indication.

ACC TARGET

[On/Off]

Displays [ON/OFF] condition of the vehicle ahead detection indicator in the information display.

ACC DISTANCE

[Off/Short/Middle/Long]

Displays [Off/Short/Middle/Long] condition of the set distance indicator in the information display.

ACC SET SPEED

[Off, km/h or mph]

Displays OFF or SET vehicle speed status in the information display.

ACC UNIT

[On/Off]

Displays [ON/OFF] condition of display unit in the information display.

SHIFT IND

[P, R, N, D, M1 - M8]

Displays shift selector position.

CHASSIS CONTROL WARN

[On/Off]

Displays [ON/OFF] condition of chassis control warning from chassis control malfunction signal received from chassis control module via CAN communication.

FUEL CAP W/L

[On/Off]

Displays [ON/OFF] condition of loose fuel cap warning message.

M RANGE SW

[ON/OFF]

Displays [ON/OFF] condition of manual mode switch.

NM RANGE SW

[On/Off]

Displays [ON/OFF] condition of non-manual mode switch.

AT SFT UP SW

[On/Off]

Displays [ON/OFF] condition of manual mode shift up switch.

AT SFT DWN SW

[On/Off]

Displays [ON/OFF] condition of manual mode shift down switch.

ST SFT UP SW

[ON/OFF]

Displays [ON/OFF] condition of paddle shifter up switch.

ST SFT DWN SW

[ON/OFF]

Displays [ON/OFF] condition of paddle shifter down switch.

PKB SW

[On/Off]

Displays [ON/OFF] condition of parking brake switch.

BUCKLE SW

[On/Off]

Status of front seat belt buckle switch LH.

BRAKE OIL SW

[On/Off]

Displays [ON/OFF] condition of brake fluid level switch.

LED LMP R OPEN

[ON/OFF]

Displays [ON/OFF] condition of LED headlamp (RH) warning message in the information display.

LED LMP L OPEN

[ON/OFF]

Displays [ON/OFF] condition of LED headlamp (LH) warning message in the information display.

DISTANCE

[km] or [Mi]

Displays distance to empty.

OUTSIDE TEMP

[deg.F or deg.C]

Displays the ambient air temperature which is input from the ambient sensor.

BUZZER

[On/Off]

X

Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter.

BATTERY CIRCUIT STATUS

[NORMAL/OPEN]

Displays fuse status for shipping mode.

HI-BEAM ASST IND

[mph/h/OFF]

Displays status of Hi-beam assist indicator.

TPMS PRESS L

[ON/OFF]

Displays [ON/OFF] condition of low tire pressure message in the information display.

FCW IND

[ON/OFF]

Displays [ON/OFF] condition of FCW warning indicator message in the information display.

LDW IND

[ON/OFF]

Displays [ON/OFF] condition of LDW warning indicator message in the information display.

TPMS FLT TIRE

[ON/OFF]

Displays [ON/OFF] condition of flat tire message in the information display.

ASCD SPD BLINK

[ON/OFF]

Blinking status of ASCD set vehicle speed judged by the ASCD status signal received from ECM via CAN communication.

ASCD STATUS

[Off, ASCD, CRUISE]

Status of ASCD status display judged by the ASCD status signal received from ECM via CAN communication.

ASCD REQ SPD

[mph/h/OFF]

ASCD set vehicle speed value judged by the ASCD status signal received from ECM via CAN communication.

TIRE PRESS FR

[kPa, kg/cm2 or Psi]

Displays air pressure of front right tire.

TIRE PRESS FL

[kPa, kg/cm2 or Psi]

Displays air pressure of front left tire.

TIRE PRESS RR

[kPa, kg/cm2 or Psi]

Displays air pressure of rear right tire.

TIRE PRESS RL

[kPa, kg/cm2 or Psi]

Displays air pressure of rear left tire.

BSW IND

[On/Off]

Displays [On/Off] condition of vehicle ahead detection indicator in the information display.

DCA IND

[On/Off]

Status of DCA switch indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line.

LDP IND

[On/Off]

Displays [Off, Short, Middle, Long] status of set distance indicator in the information display.

BSI IND

[ON/OFF]

Displays [ON/OFF] condition of BSI warning indicator message in the information display.

Status of call display

[ON/OFF]

Displays ProPILOT Assist system display jump function setting detected from ProPILOT Assist system status signal is received from ADAS control unit via CAN communication.

Lane detect

[ON/OFF]

Displays lane detection.

PP inst message

[Speed/Active 2/Active1/Standby/Off/No msg]

Displays ProPILOT Assist system instruction message.

PP display status

[Stby/Stby P/Active/Active P/Free/Free H/Malf/Off]

Displays ProPILOT Assist system display detected from ProPILOT Assist system status signal is received from ADAS control unit via CAN communication.

Hand free status

[ON/OFF]

Displays hands free warning display.

PP cancel info

[No act/Speed/Target/PA/Obstacle/Weather/E-PKB/Seatbelt]

Displays ProPILOT Assist system cancel information.

PP setting status

[Temp 1/Avail 1/Avail 2/Temp 2]

Displays ProPILOT Assist system function detected from ProPILOT Assist system status signal is received from ADAS control unit via CAN communication.

Vehicle distance

EAPM status

[On/Off/No spprt]

Displays EAPM setting.