Combination Meter: Fail-Safe: Fail-Safe
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
|
Function |
Specifications |
|
|
Speedometer |
Reset to zero by suspending communication. |
|
|
Tachometer |
||
|
Engine coolant temperature gauge |
||
|
Illumination control |
When suspending communication, changes to nighttime mode. |
|
|
Information display |
ODO/trip meter |
An indicated value is maintained at communications blackout. |
|
Shift position indicator |
The display turns OFF by suspending communication. |
|
|
Warning messages |
The display turns OFF by suspending communication. |
|
|
Buzzer |
The buzzer turns OFF by suspending communication. |
|
|
Warning lamp/indicator lamp |
ABS warning lamp |
The lamp turns ON by suspending communication. |
|
Slip indicator lamp |
||
|
Brake warning lamp |
||
|
FEB warning lamp |
||
|
RAB warning lamp |
||
|
Malfunction indicator lamp |
||
|
VDC OFF indicator lamp |
||
|
EPS warning lamp |
||
|
Low tire pressure warning lamp |
The lamp blinking caused by suspending communication. |
|
|
High beam indicator lamp |
The lamp turns OFF by suspending communication. |
|
|
Turn signal indicator lamp |
||
|
Master warning lamp |
||
|
Front fog lamp indicator lamp (if equipped) |
||
|
Lane departure warning |
||
|
High beam assist indicator lamp |
||
|
ECO drive indicator lamp (if equipped) |
||
|
Tail lamp indicator lamp |
||
|
Air bag warning lamp |
The lamp turns off when disconnected. |
|
|
Charge warning lamp |
||
|
Seat belt warning lamp |
||
|
Security indicator lamp |
||