Component Function Check
- COMBINATION METER INPUT SIGNAL
CONSULT
- Select "FUEL METER" in "Data Monitor" mode of "METER/M&A".
- Compare the "FUEL METER" value and the fuel gauge reading of the combination meter. Fuel gauge and data monitor indications should be close.
Combination meter
Monitor item
Fuel gauge
FUEL METER [L]
(Approx.)
1
59.9
3/4
48.0
1/2
32.6
1/4
18.1
Empty
2.9
Does the data monitor value approximately match the fuel gauge indication?
YES
Inspection End.
NO
Replace combination meter. Refer to Removal and Installation .