Diagnosis Procedure
- The warning is still displayed even after washer fluid is added.
- The warning is not displayed even though the washer tank is empty.
- CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT
Check the washer level switch signal circuit. Refer to Diagnosis Procedure .
Is the inspection result normal?
YES
GO TO 2.
NO
Repair harness or connector.
- CHECK WASHER LEVEL SWITCH UNIT
Perform a unit check for the washer level switch. Refer to Component Inspection .
Is the inspection result normal?
YES
Replace combination meter. Refer to COMBINATION METER : Removal & Installation .
NO
Replace washer level switch. Refer to WASHER LEVEL SWITCH : Removal & Installation .