Meter System: Fail-safe: Fail-Safe

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

Function			Specifications
Speedometer			Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge			When reception time of an abnormal signal is 60 seconds or less, the last value received. When reception time of an abnormal signal is more than 60 seconds, reset to zero.

Illumination control			When suspending communication, changes to nighttime mode.
Information display	Trip computer	ODO/trip meter	An indicated value is maintained at communications blackout.
		Shift position indicator	The display turns OFF by suspending communication.
		Current vehicle speed	Reset to zero by suspending communication.
		Current fuel consumption	The last result calculated during normal condition is indicated.
		Average fuel consumption
		Average vehicle speed
		Idling stop accumulated time/ fuel saved
	Variable compression turbo display		The display turns OFF by suspending communication.
Buzzer			The buzzer turns OFF by suspending communication.
Warning lamp/indicator lamp		ABS warning lamp	The lamp turns ON by suspending communication.
		VDC warning lamp
		Brake warning lamp

		4WD warning lamp
		Malfunction indicator lamp

		AFS OFF indicator lamp	The lamp blinking caused by suspending communication.
		Low tire pressure warning lamp	After blinking for 1 minute, the lamp remains ON.
		High beam indicator lamp	The lamp turns OFF by suspending communication.
		Turn signal indicator lamp
		Position lamp indicator lamp
		Front fog lamp indicator lamp
		A/T CHECK indicator lamp

		ATP warning lamp



		Oil pressure warning lamp
		TOW mode indicator lamp
		CK SUSP indicator lamp


		High beam assist indicator lamp
		VDC OFF indicator lamp