Meter Illumination Control Function
- The combination meter controls meter illumination, based on the following signal.
- Dimmer signal
- The combination meter switches mode between Daytime mode and Nighttime mode, according to the following conditions.
Condition
Meter illumination
Combination switch
(lighting switch)
1ST or 2ND position
Outdoor: Bright*
Daytime mode
Outdoor: Dark*
Nighttime mode
AUTO POSITION
Outdoor: Bright*
Daytime mode
Outdoor: Dark*
Nighttime mode
Off
Daytime mode
*: For further information, refer to System Description .
- The operation of the illumination control switch allows the brightness adjustment of meter illumination.
Meter illumination
The number of adjustable steps
Daytime
22 steps
Nighttime
22 steps