Component Inspection
- REMOVE FUEL LEVEL SENSOR UNIT AND FUEL PUMP
Remove the fuel level sensor unit and fuel pump. Refer to FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation .
GO TO 2.
- CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP
Check the resistance between fuel level sensor unit and fuel pump.
Terminals
Condition
Resistance (Ohm)
(Approx.)
Height [mm (in)]
Fuel level sensor unit and fuel pump
2
5
Full * (A)
46.0
280.7 (11.05)
Empty * (B)
283.0
29.4 (1.157)
*: When float rod is contact with stopper.
Is inspection result OK?
YES
INSPECTION END
NO
Replace fuel level sensor unit and fuel pump. Refer to FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation .