Diagnosis Procedure
- The low oil pressure warning lamp stays on when oil pressure is normal.
- The low oil pressure warning lamp stays off when oil pressure is low.
- CHECK COMBINATION METER INPUT
CONSULT
- Start the engine.
- Select "Data Monitor" mode of "METER/M&A".
- Select "OIL W/L".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
CONSULT
OIL W/L
Engine running
Off
Is the inspection result normal?
YES
Select "Self Diagnostic Result" mode of "ENGINE". Refer to CONSULT Function .
NO
Replace combination meter. Refer to Removal and Installation .