DTC Confirmation Procedure

If U102C-87 is displayed with any other DTCs first perform the confirmation procedure (trouble diagnosis) for the other DTCs.

Is other DTC detected?

YES

Perform diagnosis of other DTC.

NO

GO TO 2.

CONSULT

1. Ignition switch ON.
2. Ignition switch OFF and wait at least 30 seconds.
3. Ignition switch ON and wait at least 30 seconds or more.
4. Select "Self Diagnostic Result" mode of "MULTI AV".

Is DTC detected?

YES

Proceed to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: Inspection End.