Meter System: Fail-safe: Fail-Safe
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
|
Function |
Specifications |
||
|
Speedometer |
Reset to zero by suspending communication. |
||
|
Tachometer |
|||
|
Engine coolant temperature gauge |
|
||
|
Illumination control |
When suspending communication, changes to nighttime mode. |
||
|
Information display |
ODO/trip meter |
An indicated value is maintained at communications blackout. |
|
|
Shift position indicator |
The display turns OFF by suspending communication. |
||
|
Clock |
When suspending communication, internal clock time is indicated. |
||
|
Chassis control display |
The display turns no effect by suspending communication. |
||
|
Trip computer |
Current fuel consumption |
The last result calculated during normal condition is indicated. |
|
|
Average fuel consumption |
|||
|
Average vehicle speed |
|||
|
Travel time |
|||
|
Travel distance |
|||
|
Distance to empty |
|||
|
Idling stop accumulated time |
The last result calculated during normal condition is indicated by suspending communication. |
||
|
Warning/indicator |
AFS warning |
The display turns ON by suspending communication. |
|
|
AWD warning |
|||
|
Chassis control warning |
|||
|
Other than the above |
The display turns OFF by suspending communication. |
||
|
Buzzer |
The buzzer turns OFF by suspending communication. |
||
|
Warning lamp/indicator lamp |
ABS warning lamp |
The lamp turns ON by suspending communication. |
|
|
VDC warning lamp |
|||
|
Brake warning lamp |
|||
|
FEB warning lamp |
|||
|
Power steering warning lamp |
|||
|
Malfunction indicator lamp (MIL) |
|||
|
Low tire pressure warning lamp |
|
||
|
High beam indicator lamp |
The lamp turns OFF by suspending communication. |
||
|
Turn signal indicator lamp |
|||
|
VDC OFF indicator lamp |
|||
|
Front fog lamp indicator lamp |
|||
|
Position lamp indicator lamp |
|||
|
High beam assist indicator lamp |
|||
|
Charge warning lamp |
|||
|
ECO drive indicator lamp |
|||