LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2021 >> Q50 Signature Edition, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case (Service Information)) >> Removal And Installation >> Transfer Rear Oil Seal >> TRANSFER REAR OIL SEAL : Removal & Installation >> Removal

TRANSFER REAR OIL SEAL : Removal & Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the rear propeller shaft. Refer to REAR PROPELLER SHAFT : Removal & Installation .
  2. Remove self-lock nut of companion flange with a flange wrench (commercial service tool).
  3. Put matching mark SYMBOL on the end of the main shaft. The mark should be in line with the mark SYMBOL on the companion flange.
    GNSJPDIE0060Z-060Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: For matching mark, use paint. Never damage main shaft.
  4. Remove the companion flange with a puller (A).
    GNSJPDIE0061Z-061Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Never damage the companion flange.
  5. Remove the rear oil seal with the puller (A) [SST: KV381054S0 (J-34286)].
    GNSJPDIE0132Z-132Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Never damage the rear case.
scientia non olet · About LEMON Manuals