REAR FINAL DRIVE : Commercial Service Tools or/and Repair Part

WARNING: This page is about a different variant/trim than selected.

Tool name	Description
Flange wrench	Courtesy of NISSAN NORTH AMERICA, INC.	Removing and installing drive pinion lock nut
Puller	Courtesy of NISSAN NORTH AMERICA, INC.	Removing companion flange
Oil seal remover	Courtesy of NISSAN NORTH AMERICA, INC.	Removing front oil seal Removing side oil seal
Replacer	Courtesy of NISSAN NORTH AMERICA, INC.	Removing pinion rear bearing inner race
Drift a: More than inner diameter b: 45 - 50 mm (1.77 - 1.97 in) dia.	Courtesy of NISSAN NORTH AMERICA, INC.	Installing pinion rear bearing inner race
Power tool	Courtesy of NISSAN NORTH AMERICA, INC.	Loosening bolts and nuts