AWD models

WARNING: This page is about a different variant/trim than selected.

Tool name		Description
Oil seal remover	Courtesy of NISSAN NORTH AMERICA, INC.	Removing side shaft oil seal
Flange wrench	Courtesy of NISSAN NORTH AMERICA, INC.	Removing and installing drive pinion lock nut
Separator	Courtesy of NISSAN NORTH AMERICA, INC.	Removing extension tube retainer Removing pinion rear bearing inner race
Spacer a: 60 mm (2.36 in) dia. b: 36 mm (1.42 in) dia. c: 30 mm (1.18 in)	Courtesy of NISSAN NORTH AMERICA, INC.	Installing pinion front bearing inner race
Spring gauge	Courtesy of NISSAN NORTH AMERICA, INC.	Measuring turning torque
Power tool	Courtesy of NISSAN NORTH AMERICA, INC.	Loosening bolts and nuts