Diagnosis Procedure

CHECK DOOR SWITCH CIRCUIT
Connect CONSULT and check the BCM input signals. Refer to Component Function Check .

Is the inspection result normal?

YES

GO TO 2.

NO

Repair or replace malfunctioning parts.

CHECK COMBINATION METER INPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and check the "DOOR W/L" monitor value.

"DOOR W/L"
Door open	: On
Door closed	: Off

Is the inspection result normal?

YES

Replace combination meter. Refer to COMBINATION METER : Removal & Installation .

NO

Replace BCM. Refer to BCM : Removal & Installation .