Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect combination meter harness connector and spiral cable harness connector.
3. Check continuity between combination meter harness connector and spiral cable harness connector.
   With paddle shifter
   
   

   Combination meter		Spiral cable		Continuity
   Connector	Terminal	Connector	Terminal
   M57	23	M190	33	Existed

   Without paddle shifter
   
   

   Combination meter		Spiral cable		Continuity
   Connector	Terminal	Connector	Terminal
   M57	23	M190	31	Existed

4. Check continuity between combination meter harness connector and ground.

   Combination meter		Ground	Continuity
   Connector	Terminal
   M57	23		Not existed

Is the inspection result normal?

YES

GO TO 2.

NO

Repair harness or connector.

1. Disconnect combination meter harness connector and spiral cable harness connector.
2. Check continuity between combination meter harness connector and spiral cable harness connector.
   With paddle shifter
   
   

   Combination meter		Spiral cable		Continuity
   Connector	Terminal	Connector	Terminal
   M57	21	M190	32	Existed

   Without paddle shifter
   
   

   Combination meter		Spiral cable		Continuity
   Connector	Terminal	Connector	Terminal
   M57	21	M190	31	Existed

3. Check continuity between combination meter harness connector and ground.

   Combination meter		Ground	Continuity
   Connector	Terminal
   M57	21		Not existed

Is the inspection result normal?

YES

GO TO 3.

NO

Repair harness or connector.

1. Disconnect steering switch connector.
2. Check continuity between spiral cable harness connectors.
   With paddle shifter
   
   

   Spiral cable		Continuity
   Terminal
   33	14	Existed
   32	15

   Without paddle shifter
   
   

   Spiral cable		Continuity
   Terminal
   31	15	Existed
   33	17

Is the inspection result normal?

YES

GO TO 4.

NO

Replace spiral cable. Refer to SPIRAL CABLE : Removal & Installation .

Check steering switch. Refer to Component Inspection .

Is the inspection result normal?

YES

INSPECTION END

NO

Replace steering switch. Refer to STEERING SWITCH : Removal & Installation .