Diagnosis Procedure

CHECK TRUNK LID OPEN SIGNAL CIRCUIT
1. Connect the CONSULT.
2. Check the BCM input signals. Refer to Component Function Check .
Is the inspection result normal?

YES

GO TO 2.

NO

Repair or replace malfunctioning parts.

CHECK COMBINATION METER INPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and check the "TRUNK/GLAS-H" monitor value.

"TRUNK/GLAS-H"
Trunk lid open	: On
Trunk lid closed	: Off

Is the inspection result normal?

YES

Replace combination meter. Refer to COMBINATION METER : Removal & Installation .

NO

Replace BCM. Refer to BCM : Removal & Installation .