System Description: Description

Back Light Illumination Control Function 

The operation of the illumination control switch allows the brightness adjustment of meter illumination.

Meter Illumination Control Function 

• Combination meter controls meter illumination, based on the dimmer signal.
• The combination meter switches mode between Daytime mode and Nighttime mode, according to the following conditions.

  Condition			Meter illumination
  Combination switch (lighting switch)	1ST or 2ND position	Outdoor: Bright*	Daytime mode
  		Outdoor: Dark*	Nighttime mode
  	AUTO POSITION	Outdoor: Bright*	Daytime mode
  		Outdoor: Dark*	Nighttime mode
  	Off		Daytime mode

  *: For further information, Refer to System Description .

Signal Path