Data Monitor

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER

[km/h]

X

Value of vehicle speed signal received from ABS actuator and electric unit (control unit) via CAN communication.

SPEED OUTPUT

[km/h]

X

Vehicle speed signal value transmitted to other units via CAN communication.

ODO OUTPUT

[km/h or mph]

Odometer signal value transmitted to other units via CAN communication.

TACHO METER

[rpm]

X

• Value of the engine speed signal received from TCM via CAN communication. (VR30DDTT engine models)
• Value of the engine speed signal received from ECM via CAN communication. (Except for VR30DDTT engine models)

FUEL METER

[L]

X

Fuel level indicated on combination meter.

W TEMP METER

[ deg.C]

X

Value of engine coolant temperature signal is received from ECM via CAN communication.

ABS W/L

[On/Off]

Status of ABS warning lamp detected from ABS warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication.

VDC/TCS IND

[On/Off]

Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication.

SLIP IND

[On/Off]

Status of VDC warning lamp detected from VDC warning lamp signal received from ABS actuator and electric unit (control unit) via CAN communication.

BRAKE W/L

[On/Off]

Status of brake warning lamp detected from brake warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication and brake fluid level switch signal from brake fluid level switch.

DOOR W/L

[On/Off]

Status of door open warning detected from door switch signal received from BCM via CAN communication.

TRUNK/GLAS-H

[On/Off]

Status of trunk open warning detected from trunk switch signal received from BCM via CAN communication.

HI-BEAM IND

[On/Off]

Status of high beam indicator lamp detected from high beam request signal is received from BCM via CAN communication.

TURN IND

[On/Off]

Status of turn signal indicator lamp detected from turn indicator signal is received from BCM via CAN communication.

FR FOG IND

[On/Off]

Status of front fog lamp indicator lamp detected from front fog light request signal is received from BCM via CAN communication.

RR FOG IND

[Off]

LIGHT IND

[On/Off]

Status of position lamp indicator lamp detected from position light request signal is received from BCM via CAN communication.

OIL W/L

[On/Off]

Status of engine oil pressure warning detected from oil pressure warning signal is received from ECM via CAN communication.

MIL

[On/Off]

Status of malfunction indicator lamp detected from malfunctioning indicator signal is received from ECM via CAN communication.

BA W/L

[On/Off]

Status of FEB warning lamp judged from FEB warning lamp signal received from ADAS control unit via CAN communication.

ATC/T-AMT W/L

[On/Off]

Status of A/T check warning judged from A/T CHECK indicator signal received from TCM via CAN communication.

GEAR SHIFT IND

[Up, Down, Up/Dwn]

Status of gear shift indicator judged from gear shift indicator signal received from ECM via CAN communication.

4WD W/L

[On/Off]

Status of AWD warning judged from AWD warning signal received from AWD control unit via CAN communication.

FUEL W/L

[On/Off]

Low fuel warning lamp status detected by the identified fuel level.

WASHER W/L

[On/Off]

Status of low washer fluid warning judged from washer level switch input to combination meter.

AIR PRES W/L

[On/Off]

Status of low tire pressure warning lamp judged from low tire pressure lamp signal received from BCM via CAN communication.

KEY G/Y W/L

[ON/Off]

Status of Intelligent Key system warning judged from meter display signal received from BCM via CAN communication.

EPS W/L

[On/Off]

Status of power steering warning lamp judged from power steering warning lamp signal received from steering force control module via CAN communication.

AFS OFF IND

[On/Off]

Status of AFS warning judged from AFS warning signal received from AFS control unit via CAN communication.

READY IND

[Off]

SYS FAIL W/L

[Off]

SFT POSI W/L

[Off]

HEV BRAKE W/L

[Off]

IDOL STOP IND

[On/Off]

Status of stop/start indicator lamp judged from stop/start indicator lamp signal received from ECM via CAN communication.

CHAGE W/L

[On/Off]

Status of charge warning lamp judged from charge warning lamp signal received from ECM via CAN communication.

ACC TARGET

[On/Off]

Status of vehicle ahead detection indicator judged from meter display signal received from ADAS control unit via CAN communication.

ACC DISTANCE

[Off, Short, Middle, Long]

Status of set distance indicator judged from meter display signal received from ADAS control unit via CAN communication.

ACC SET SPEED

[On/Off]

Status of set vehicle speed indicator judged from meter display signal received from ADAS control unit via CAN communication.

ACC UNIT

[On/Off]

Status of display unit judged from meter display signal received from ADAS control unit via CAN communication.

SHIFT IND

[P, R, N, D, M1, M2, M3, M4, M5, M6, M7]

Status of shift position indicator judged from shift position signal received from TCM via CAN communication.

ECO DRIVE IND G

[On/Off]

Status of ECO drive indicator (green) judged from ECO drive indicator control signal received from ECM via CAN communication.

FUEL CAP W/L

[On/Off]

Status of fuel filler cap warning display detected from fuel filler cap warning display signal received from ECM via CAN communication.

M RANGE SW

[On/Off]

Status of manual mode switch.

NM RANGE SW

[On/Off]

Status of non-manual mode switch.

AT SFT UP SW

[On/Off]

Status of manual mode shift up switch.

AT SFT DWN SW

[On/Off]

Status of manual mode shift down switch.

ST SFT UP SW

[On/Off]

Status of paddle shifter up switch.

ST SFT DWN SW

[On/Off]

Status of paddle shifter down switch.

PKB SW

[On/Off]

Status of parking brake switch.

BUCKLE SW

[On/Off]

Status of seat belt buckle switch (driver side).

BRAKE OIL SW

[On/Off]

Status of brake fluid level switch.

LED LMP R OPEN

[On/Off]

Status of front combination lamp RH judged based on LED headlamp (RH) warning signal input from front combination lamp RH.

LED LMP L OPEN

[On/Off]

Status of front combination lamp LH judged based on LED headlamp (LH) warning signal input from front combination lamp LH.

DISTANCE

[km] or [Mi]

Value of distance to empty calculated by combination meter.

OUTSIDE TEMP

[ deg.C or deg.F]

Ambient temperature value converted from ambient sensor signal received from ambient sensor.

FUEL LOW SIG

[On/Off]

Status of fuel level low warning signal to output to display control unit via AV communication.

CRANKING SIG

[On/Off]

Status of cranking judged from engine status signal received from BCM via CAN communication line.

ST CNT SIG

[On/Off]

Status of starter relay status signal received from BCM via CAN communication line.

BUZZER

[On/Off]

X

Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter.

BAT CIR STA

[Normal/Open]

Status of battery power supply circuit.

TPMS FLT TIRE

[On/Off]

Status of flat tire detected from tire pressure data signal is received form BCM via CAN communication.

TPMS PRESS L

[On/Off]

Status of tire pressure low from tire pressure data signal is received form BCM via CAN communication

ASCD SPD BLINK

[On/Off]

Blinking status of ASCD set vehicle speed judged by the ASCD status signal received from ECM via CAN communication.

ASCD STATUS

[Off, ASCD, CRUISE]

Status of ASCD status display judged by the ASCD status signal received from ECM via CAN communication.

ASCD REQ SPD

[km/h/Off]

ASCD set vehicle speed value judged by the ASCD status signal received from ECM via CAN communication.

HILL HOLD WARNING

[Off]

ASSIST/CHARGE GAUGE

[%]

EV IND

[Off]

ECO DRIVE NAVI

[LEVEL 0]

LCD

[B&P N, B&P I, C&P N, C&P I, SFT P, BATT, NO KY, LK WN, IGN AUTO OFF, 3 min before IGN OFF, OFF]

X

Status of engine start operation indicator lamp, shift P warning lamp and KEY warning lamp, detected from engine start operation indicator lamp signal, shift P warning lamp signal and key warning lamp signal are received from BCM via CAN communication.

STRG SW INPUT

[SW1-SW10, Off]

Status of steering switch.

ITS SONER SET OUTPUT

[FCW ON/OFF, LDW ON/OFF, BSW ON/OFF, DCA ON/OFF/HIGH/MID/LOW, LDP ON/OFF/T MID/T LATE, BSI ON/BRIGHT/STD/DARK, BCI IGN ON/OFF, IBA ON/OFF, BCI AUTO ON/OFF, NO SW ST ]

Status of warning systems indicator or dynamic driver assistance systems indicator judged by the meter display signal received from ADAS control unit via CAN communication.

CHASSIS CONTROL WARN

[On/Off]

Status of chassis control warning from chassis control malfunction signal is received form chassis control module via CAN communication.

LOW LI-ION BAT CHG WARN

[Off]

VSP OFF IND

[Off]

HI-BEAM ASST IND

[km/h/Off]

Status of high beam assist indicator lamp from high beam assist indicator lamp signal is received form BCM via CAN communication.

DIPPED BEAM IND

[Off]

X

TIRE PRESS FR

[kPa, kg/cm2 or Psi]

The data of front RH tire pressure form BCM via CAN communication.

TIRE PRESS FL

[kPa, kg/cm2 or Psi]

The data of front LH tire pressure form BCM via CAN communication.

TIRE PRESS RR

[kPa, kg/cm2 or Psi]

The data of rear RH tire pressure form BCM via CAN communication.

TIRE PRESS RL

[kPa, kg/cm2 or Psi]

The data of rear LH tire pressure form BCM via CAN communication.

METER RAM

[ERROR/NORMAL]

Status of ram error data.