Component Inspection (Heated Steering Wheel Relay)
- CHECK HEATED STEERING WHEEL RELAY CONTINUITY
Check continuity between heated steering wheel relay terminals.
CAUTION:- Connect the fuse between the terminals when applying the voltage.
- To prevent damage, always observe the correct polarity.
- Prevent short-circuit.
Heated steering wheel relay
Condition
Continuity
Terminal
3 - 5
Apply 12 V direct current between terminals 1 and 2.
Existed
Other conditions.
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace heated steering wheel relay. Refer to Component Location .