Meter System: Fail-safe: Fail-Safe
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
|
Function |
Specifications |
|
|
Speedometer |
Reset to zero by suspending communication. |
|
|
Tachometer |
||
|
Engine coolant temperature gauge |
||
|
Engine oil pressure gauge |
||
|
Illumination control |
When suspending communication, changes to nighttime mode. |
|
|
Information display |
ODO/trip meter |
An indicated value is maintained at communications blackout. |
|
Shift position indicator |
The display turns OFF by suspending communication. |
|
|
Door open warning |
The display turns OFF by suspending communication. |
|
|
Fuel filler cap warning |
||
|
Low tire pressure warning |
||
|
Buzzer |
The buzzer turns OFF by suspending communication. |
|
|
Warning lamp/indicator lamp |
ABS warning lamp |
The lamp turns ON by suspending communication. |
|
VDC warning lamp |
||
|
Brake warning lamp |
||
|
FEB indicator lamp |
||
|
4WD warning lamp |
||
|
Malfunction indicator lamp |
||
|
CRUISE warning lamp |
||
|
AFS OFF indicator lamp |
The lamp blinking caused by suspending communication. |
|
|
Low tire pressure warning lamp |
After blinking for 1 minute, the lamp remains ON. |
|
|
High beam indicator lamp |
The lamp turns OFF by suspending communication. |
|
|
Turn signal indicator lamp |
||
|
Position lamp indicator lamp |
||
|
Front fog lamp indicator lamp |
||
|
A/T CHECK indicator lamp |
||
|
Key warning lamp |
||
|
ATP warning lamp |
||
|
Lane departure warning lamp |
||
|
LDP ON indicator lamp |
||
|
CRUISE indicator lamp |
||
|
Oil pressure warning lamp |
||
|
TOW mode indicator lamp |
||
|
CK SUSP indicator lamp |
||
|
Blind Spot Intervention ON indicator |
||
|
Blind Spot Warning/Blind Spot Intervention warning lamp |
||
|
High beam assist indicator lamp |
||
|
VDC OFF indicator lamp |
||