Component Inspection
- CHECK STEERING SWITCH RESISTANCE
Check resistance between the following steering switch terminals.
Terminal
Signal name
Condition
Resistance (Ohm)
(Approx.)
14
17
Enter
Depress ENTER switch.
2023
Menu Up
Depress ENTER switch up.
121
Menu Down
Depress ENTER switch down.
321
15
Display
Depress DISPLAY switch.
2023
Back
Depress BACK switch.
723
Is the inspection results normal?
YES
GO TO 2
NO
Replace steering wheel switch. Refer to Removal and Installation .
- CHECK SPIRAL CABLE
Check continuity between the following spiral cable terminals.
Terminals
Continuity
14
24
Yes
15
31
17
33
Is the inspection results normal?
YES
Inspection End.
NO
Replace spiral cable. Refer to Removal and Installation .