LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX60 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Removal And Installation >> Cluster Lid A >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove instrument side finisher (LH) (1) using a suitable tool.
    GNSALJIA0335Z-335Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove instrument lower panel LH. Refer to Removal and Installation .
  3. Release cluster lid A pawls and metal clips using a suitable tool, disconnect the harness connector and remove.
    GNSDB112839Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Metal clip

    SYMBOL : Pawl

scientia non olet · About LEMON Manuals