LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> Electrical >> Gauges >> Meter, Warning Lamp Indicator (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC B1276: Configuration >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK SELF-DIAGNOSIS RESULTS 

    SYMBOL With CONSULT

    Check if any DTC other than "B1276-55" is detected in "Self Diagnostic Result" of "METER/M&A".

    Is any DTC detected?

    YES

    Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index .

    NO

    GO TO 2.

  2. CHECK NUMBER OF ENTRIES IN SERVICE MEMORY 

    SYMBOL With CONSULT

    Check "Index service memory" in "DATA MONITOR". Refer to Reference Value .

    NOTE: The service memory contains fewer than 47 entries.

    Does the service memory contain more than 47 entries?

    YES

    GO TO 3.

    NO

    INSPECTION END

  3. PERFORM DTC CONFIRMATION PROCEDURE AGAIN 

    SYMBOL With CONSULT

    1. Erase DTC.
    2. Perform DTC confirmation procedure again. Refer to DTC Description .

    Is DTC "B1276-55" detected as the current malfunction?

    YES

    Replace combination meter. Refer to Removal and Installation .

    NO

    INSPECTION END