On Board Diagnosis Item

The combination meter allows the following diagnosis items with the on-board diagnosis function.

Test item	Description
Vehicle data	The following data can be called up in the "vehicle data" menu: Voltage (in V) and amp draw (in A) in on-board electrical system Data from combination meter (e.g. version numbers, software releases) Engine data (e.g. engine number) Vehicle identification number (VIN)
Roller test	Activating the "Roller test" prevents malfunctions being entered in the electronic stability program control unit during the brake test on the "Roller test". The following settings can be selected in the "Roller test" menu: On Off when ign. off NOTE: If the "Roller test" menu is not deactivated before the on-board diagnosis menu is exited, it will automatically be called up upon the next ignition cycle.
Pad replacement	In the "Pad replacement" menu, the following settings can be selected: OK Move to fitting position
MAINTENANCE	The following data can be called up in the "MAINTENANCE" menu: Service data Full service NOTE: After a service is performed, the service interval is reset in this menu.