Application Items
CONSULT can perform the following diagnosis modes via CAN communication and the combination meter.
|
System |
Diagnosis mode |
Description |
|
METER/M&A |
Self Diagnostic Result |
The combination meter checks the conditions and displays memorized errors. |
|
Data Monitor |
Displays the combination meter input/output data in real time. |
|
|
Work Support |
Displays diagnosis procedure of each work item. |
|
|
Active Test |
Operation of electrical loads can be checked by sending driving signal to them. |
|
|
ECU Identification |
The combination meter part number is displayed. |
|
|
Configuration |
Automatically writes the vehicle specification when replacing combination meter. |