DTC Detection Logic
|
DTC |
CONSULT screen terms |
DTC detection condition |
|||
|
(Trouble diagnosis content) |
[Malfunction type] |
||||
|
U11A4 |
00 |
Comm ECU H/L range adjust malf (Communication with control unit 'Headlamp range adjustment' has a malfunction.) |
NO SUBTYPE INFORMATION |
Diagnosis condition |
Ignition switch ON (After ignition switch ON, wait for 5 seconds to start the engine) |
|
Signal (terminal) |
CAN communication signal |
||||
|
Threshold |
At least one of messages is missing in the bus |
||||
|
Diagnosis delay time |
According to every specific signal applications requirement |
||||