Inspection After Assembly
2346 Brake Clearance
Set a dial indicator (A) as shown in the figure, below. Blow air into 2346 brake oil pressure hole (B), and measure 2346 brake clearance. If clearance is outside the specified value, adjust clearance by selecting an appropriate snap ring (1). Refer to Oil Channel .
|
Air pressure |
: 300 kPa (3.06 kg/cm 2 , 43.5 psi) |
|
2346 brake clearance |
: Refer to 2346 Brake Clearance . |
CAUTION:
Never exceed the specified air pressure value.