LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Except Hybrid) >> Unit Disassembly And Assembly >> Direct Clutch >> Assembly

Direct Clutch: Assembly

  1. Install direct clutch component part (drive plates, driven plates, retaining plate, and dish plate) to direct clutch drum.
    • VQ37VHR models
      GNSJSDIA1919Z-919Courtesy of NISSAN NORTH AMERICA, INC.

      1

      : Snap ring

      2

      : Retaining plate

      3

      : Drive plate (five pieces)

      4

      : Driven plate (five pieces)

      5

      : Dish plate
      CAUTION: Check the order of plates.
    • VK56VD models
      GNSJSDIA1920Z-920Courtesy of NISSAN NORTH AMERICA, INC.

      1

      : Snap ring

      2

      : Retaining plate

      3

      : Drive plate (six pieces)

      4

      : Driven plate (six pieces)

      5

      : Dish plate
      CAUTION: Check the order of plates.
  2. Install snap rings to direct clutch drum using a flat-bladed screwdriver.
    G04075903Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Be careful not to scratch direct clutch drum and direct clutch retaining plate.
    • Be careful not to damage snap ring.
scientia non olet · About LEMON Manuals