DTC Index

NOTE:

If some DTCs are displayed at the same time, perform inspections one by one based on the priority as per the following list. Refer to DTC Inspection Priority Chart .
The IGN counter is indicated in Freeze frame data (FFD). Refer to CONSULT Function .

Items (CONSULT screen terms)	DTC ^*1		Reference
Items (CONSULT screen terms)	MIL ^*2 , "ENGINE" with CONSULT or GST	CONSULT only "TRANSMISSION"	Reference
STARTER RELAY	--	P0615	DTC Logic
T/M RANGE SENSOR A	P0705	P0705	DTC Logic
FLUID TEMP SENSOR A	P0710	P0710	DTC Logic
INPUT SPEED SENSOR A	P0717	P0717	DTC Logic
OUTPUT SPEED SENSOR	P0720	P0720	DTC Logic
ENGINE SPEED	--	P0725	DTC Logic
6GR INCORRECT RATIO	P0729	P0729	DTC Logic
INCORRECT GR RATIO	P0730	P0730	DTC Logic
1GR INCORRECT RATIO	P0731	P0731	DTC Logic
2GR INCORRECT RATIO	P0732	P0732	DTC Logic
3GR INCORRECT RATIO	P0733	P0733	DTC Logic
4GR INCORRECT RATIO	P0734	P0734	DTC Logic
5GR INCORRECT RATIO	P0735	P0735	DTC Logic
TORQUE CONVERTER	P0740	P0740	DTC Logic
TORQUE CONVERTER	P0744	P0744	DTC Logic
PC SOLENOID A	P0745	P0745	DTC Logic
SHIFT SOLENOID A	P0750	P0750	DTC Logic
PC SOLENOID B	P0775	P0775	DTC Logic
SHIFT	P0780	P0780	DTC Logic
PC SOLENOID C	P0795	P0795	DTC Logic
TP SENSOR	--	P1705	DTC Logic
VEHICLE SPEED SIGNAL	--	P1721	DTC Logic
INTERLOCK	P1730	P1730	DTC Logic
7GR INCORRECT RATIO	P1734	P1734	DTC Logic
M-MODE SWITCH	--	P1815	DTC Logic
PC SOLENOID D	P2713	P2713	DTC Logic
PC SOLENOID E	P2722	P2722	DTC Logic
PC SOLENOID F	P2731	P2731	DTC Logic
PC SOLENOID G	P2807	P2807	DTC Logic
LOST COMM (ECM A)	U0100 ^*3	U0100	DTC Logic
CAN COMM DATA	--	U0300	DTC Logic
CAN COMM CIRCUIT	--	U1000	DTC Logic

*1: These numbers are prescribed by SAE J2012.

*3: Except for USA & Canada