LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRS Airbag (Except Hybrid) >> Removal And Installation >> Passenger Air Bag Module >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the instrument panel assembly. Refer to Removal and Installation .
  2. Remove the passenger air bag module fixing nuts (A).
    GNSJMHIA1518Z-518Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the passenger air bag module from instrument panel assembly.
  4. CAUTION:
    • Always place the passenger air bag module with pad side facing upward.
      GNSJMHIA0661Z-661Courtesy of NISSAN NORTH AMERICA, INC.

      SYMBOL

      : Upward

    • Never impact the passenger air bag module.
      GNSJMHIA09Z-009Courtesy of NISSAN NORTH AMERICA, INC.
    • Replace the passenger air bag module if it has been dropped or sustained an impact.
    • Never insert any foreign objects (screwdriver, etc.) into the passenger air bag module.
    • Never disassemble the passenger air bag module.
    • Never expose the passenger air bag module to temperatures exceeding 90 deg. C (194 deg. F).
    • Never allow oil, grease, detergent, or water to come in contact with the passenger air bag module.