Removal and Installation: Removal

Remove the headlining. Refer to Removal and Installation .

Disconnect the curtain air bag module harness connector.

CAUTION:

For installing/removing the curtain air bag module harness connector, insert thin screwdriver wrapped in tape into notch, lift lock and remove the connector.

Courtesy of NISSAN NORTH AMERICA, INC.

Install the connector with lock raised, and push lock into the connector.
After installing the connector, check that the lock is pushed securely into it.

Remove the fixing bolts, and then remove the curtain air bag module.

CAUTION:

Never impact the curtain air bag module.

Courtesy of NISSAN NORTH AMERICA, INC.

Replace the curtain air bag module if it has been dropped or sustained an impact.
Never insert any foreign objects (screwdriver, etc.) into the curtain air bag module.
Never disassemble the curtain air bag module.
Never expose the curtain air bag module to temperatures exceeding 90 deg. C (194 deg. F).
Never allow oil, grease, detergent, or water to come in contact with the curtain air bag module.