LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case (Except Hybrid)) >> Removal And Installation >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Remove trunk side finisher LH. Refer to Removal and Installation .
  3. Disconnect AWD control unit harness connector.
  4. Remove AWD control unit mounting nuts.
  5. Remove AWD control unit.
scientia non olet · About LEMON Manuals