LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Suspension (AWD) (Except Hybrid)) >> AWD >> Periodic Maintenance >> Wheel Alignment >> Inspection >> Description

Wheel Alignment: Inspection: Description

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Camber, caster, kingpin inclination angles cannot be adjusted.
  • If camber, caster, or kingpin inclination angle is outside the standard, check front suspension parts for wear and damage. Replace suspect parts if a malfunction is detected.
  • Kingpin inclination angle is reference value, no inspection is required.

Measure wheel alignment under unladen conditions.

NOTE: "Unladen conditions" means that fuel, engine coolant, and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
scientia non olet · About LEMON Manuals