LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Axle (AWD) (Except Hybrid)) >> AWD >> Removal And Installation >> Front Drive Shaft Boot >> Final Drive Side >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check wheel sensor harness for proper connection. Refer to Exploded View .
  2. Check the wheel alignment. Refer to Inspection .
  3. Adjust neutral position of steering angle sensor. Refer to Description .
scientia non olet · About LEMON Manuals