LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (5.6L) (Except Hybrid) >> Removal And Installation >> Oil Pan (Lower) And Oil Strainer >> AWD >> Inspection >> Inspection After Installation

Inspection After Installation

  1. Check the engine oil level and adjust engine oil. Refer to Inspection .
  2. Start engine, and check there is no leakage of engine oil.
  3. Stop engine and wait for 15 minutes.
  4. Check the engine oil level again. Refer to Inspection .
scientia non olet · About LEMON Manuals