Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect combination meter connector and washer level switch connector.
3. Check continuity between combination meter harness connector and washer level switch harness connector.

   Terminals				Continuity
   Combination meter		Washer level switch
   Connector	Terminal	Connector	Terminal
   M53	29	E32	1	Existed

4. Check continuity between combination meter harness connector and ground.

   Terminals			Continuity
   Combination meter		Ground
   Connector	Terminal
   M53	29		Not existed

Is the inspection result normal?

YES

GO TO 2.

NO

Repair harness or connector.

Check continuity between washer level switch connector and ground.

Is the inspection result normal?

YES

INSPECTION END

NO

Repair harness or connector.