Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector and oil pressure switch connector.
3. Check continuity between IPDM E/R harness connector and oil pressure switch harness connector.

   Terminals				Continuity
   (+)		(-)
   IPDM E/R		Oil pressure switch
   Connector	Terminal	Connector	Terminal
   E7	75	F37	1	Existed

4. Check continuity between IPDM E/R harness connector and ground.

   Terminals			Continuity
   (+)		(-)
   IPDM E/R		Ground
   Connector	Terminal
   E7	75		Not existed

Is the inspection result normal?

YES

INSPECTION END

NO

Repair harness or connector.