LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Final Drive (R208) (Except Hybrid) >> Rear Final Drive: R208 >> Unit Removal And Installation >> Rear Final Drive Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove center muffler with a power tool. Refer to Removal and Installation .
  2. Remove stabilizer bar with a power tool. Refer to Removal and Installation . (with stabilizer bar)
  3. Remove rear propeller shaft from the final drive. Refer to Removal and Installation (2WD), Removal and Installation (AWD).
  4. Remove rear suspension member stay. Refer to Removal and Installation .
  5. Separate drive shaft from final drive. Refer to Removal and Installation .
  6. Remove breather hose from the final drive.
  7. Set a suitable jack to rear final drive assembly.
    GNSJSDIA0026Z-026Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Never place a jack on the rear cover (aluminum case).
  8. Remove rear wheel sensor. Refer to Removal and Installation .
  9. Remove the mounting bolts and nuts connecting to the suspension member with a power tool. And then, remove rear final drive assembly.
    CAUTION: Secure rear final drive assembly to suitable jack while removing it.
scientia non olet · About LEMON Manuals