LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Final Drive (R200) (Except Hybrid) >> Rear Final Drive: R200 >> Removal And Installation >> Side Oil Seal >> Removal and Installation >> Installation

Removal and Installation: Installation

  1. Apply multi-purpose grease to side oil seal lips.
  2. Install side oil seal until it becomes flush with the case end, using the drift (A) [SST: ST35271000 (J-26091)].
    GNSJPDID0287Z-287Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Never reuse oil seal.
    • When installing, never incline oil seal.
  3. Install final drive assembly. Refer to Removal and Installation .
  4. When oil leaks while removing, check oil level after the installation. Refer to Inspection .
scientia non olet · About LEMON Manuals