Sunroof Motor Assembly

1. Turn ignition switch OFF.
2. Disconnect combination meter harness connector and sunroof motor assembly harness connector.
3. Check continuity between combination meter harness connector and sunroof motor assembly harness connector.

   Combination meter		Sunroof motor assembly		Continuity
   Connector	Terminal	Connector	Terminal
   M53	4	R4	8	Exists

4. Check continuity between sunroof motor assembly harness connector and ground.

   Sunroof motor assembly		Ground	Continuity
   Connector	Terminal
   R4	8		Not existed

Is the inspection result normal?

YES

Check combination meter. Refer to Diagnosis Procedure .

NO

Repair or replace harness or connector.