LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Tilt Telescopic Switch Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT 
    1. Turn Ignition Switch OFF.
    2. Disconnect Tilt & Telescopic Switch connector.
    3. Check continuity between Tilt & Telescopic Switch harness connector and ground.

    Tilt & Telescopic Switch

    Ground

    Continuity

    Connector

    Terminal

    M31

    1

    Existed

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Repair or replace harness.

scientia non olet · About LEMON Manuals