LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Sliding Switch >> Component Inspection

Component Inspection

  1. CHECK SLIDING SWITCH 
    1. Turn Ignition Switch OFF.
    2. Disconnect power seat Switch (sliding Switch) connector.
    3. Check continuity between power seat Switch (sliding Switch) terminals.

      Power seat Switch (Sliding Switch)

      Condition

      Continuity

      Terminal

      2

      11

      Sliding Switch (backward)

      Operate

      Existed

      Release

      Not existed

      12

      Sliding Switch (forward)

      Operate

      Existed

      Release

      Not existed

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace power seat Switch. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals