LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Sliding Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select "SLIDE PULSE" in "Data monitor" mode with CONSULT.
    2. Check sliding sensor signal under the following conditions.

      Monitor item

      Condition

      Value

      SLIDE PULSE

      Seat sliding

      Operate (forward)

      Change (increase) *1

      Operate (backward)

      Change (decrease) *1

      Release

      No change *1

      *1 : The value at the seat position attained when the battery is connected is considered to be 32768.

    Is the indication normal?

    YES

    INSPECTION END

    NO

    Perform diagnosis procedure. Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals