Component Inspection

CHECK MIRROR SWITCH

Turn Ignition Switch OFF.
Disconnect Power Window Main Switch (Door Mirror Remote Control Switch) connector.
Check continuity between Power Window Main Switch (Door Mirror Remote Control Switch) terminals.

Power Window Main Switch (Door Mirror Remote Control Switch)		Condition		Continuity
Terminal
24	7	Mirror Switch	LEFT	Existed
			Other than the above	Not existed
25			DOWN	Existed
			Other than the above	Not existed
26			UP	Existed
			Other than the above	Not existed
27			RIGHT	Existed
			Other than the above	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace Power Window Main Switch (Door Mirror Remote Control Switch). Refer to Removal and Installation .